MENU
The Abtec Audio Lounge
"Experience the art of sound"

Audioengine HD3

Purchase this product

RRP: $799.00
Our Price: $599.00

Enquire about this product Print Product Information

Powered Wireless Desktop Speaker


Our HD Series was designed for the way people listen to music today streaming wirelessly, digital downloads, vinyl, etc. HD3 sets a new standard for compact mini music systems because of its versatility and ability to play all of your music from any device. Connect to HD3 any way you like: wirelessly or wired, digital or analog. Stream your music library, TIDAL, Spotify, Pandora, YouTube, etc. to HD3 from just about anywhere in your house without dropouts. Wireless setup is a breeze and only takes about a minute. And if you’re using HD3 on your desktop, connect up with a USB cable. The USB input bypasses your computer’s built-in low-quality headphone jack for a high-end listening experience. But if you’re not keen on USB or wireless you can still use any audio cable to connect. General specifications Type 2.0 powered multimedia speaker system Amplifier type Dual analog class A/B monolithic Power output 60W peak power total (15W RMS / 30W peak per channel), AES Drivers 2.75" Kevlar woofers, 3/4” silk dome tweeters Inputs 3.5mm stereo mini-jack, stereo RCA, USB, Bluetooth Outputs RCA variable line-out, 3.5mm mini-jack headphone out Mains voltages 110-240V 50/60Hz auto-switching SNR 95dB (typical A-weighted) THD+N <0.05% at all power settings Crosstalk <50dB Frequency response 65Hz-22kHz ±2.0dB Freq. response w/bass reduction switch selected 100Hz-22kHz ±2.0dB (-5dB down) Input impedance 5K ohms unbalanced Headphone amp specifications Headphone amp type OPA2134 Full-scale headphone output level 2.0V RMS Output impedance 2 ohms Recommended headphone impedance range 10 ohms to 10K ohms Bluetooth specifications Internal D/A converter PCM 5102 Input bit depth 24-bits, upsampled Bluetooth receiver type Bluetooth 4.0 audio Supported codecs aptX, AAC, SBC Wireless operation range Up to 100ft (30m) typical Input data rate Determined by Bluetooth Wireless latency ~30 milliseconds (ms) USB specifications Connector type Micro-USB USB device class USB 1.1 or above Internal D/A converter PCM 5102 Input bit depth 24-bits, upsampled Input data rate 44.1KHz/48KHz Protection Output current limiting, thermal over-temperature, power on/off transient protection Dimensions (each) 7”(H) x 4.25”(W) x 5.5”(D) Weight (LEFT speaker) 1.8Kg/4lbs Weight (RIGHT speaker) 1.5Kg/3.4lbs Shipping weight 4.5kg/10lbs per pair Shipping box dimensions 11.6 (29.5cm)H x 11.75 (30cm)L x 8.8(22.5cm)W Materials and construction 18mm thick MDF cabinets with real wood veneer 3/4" (20mm) silk dome tweeters with neodymium magnets 2.75" Kevlar woofers with advanced voice coils


Products that customers have also bought:


Abtec - bringing the future to you...