The Abtec Audio Lounge
"Experience the art of sound"

Rockford Fosgate R150X2

Purchase this product

RRP: $269.00
Our Price: $259.00

Enquire about this product Print Product Information

Prime 150 Watt 2-Channel Amplifier

The PRIME R150X2 is a 2-channel amplifier that can pump-out 75 Watts into both channels at 2-Ohms, making it perfect for full-range or component speakers. The R150X2 can also run in bridged/mono mode for use with subwoofers. Rockford Fosgate amplification at an unbelievable value. The R150X2 2-channel amplifier pumps out more than enough to power a set full-range or component speakers, or you can bridge it into a 4-ohm load to produce 150 watts for a single R1S410 10" or R1S412 12" woofer. Check out our RFTECH:Woofer WiringWizard to get the most out of your amplifier. -12dB/octave Butterworth crossover -On-board Punch EQ with +18dB boost @ 45Hz. -RCA pass-thru outputs -High Level Input (4-pin) -Real time output and power supply thermal sensing -Cast aluminum heatsink -4 Gauge power/ground connectors -MOSFET power supply -Over current protection -Short circuit protection -Muted turn on CEA-2006 Compliant: CEA-2006 Guidelines CEA-2006 Power Rating 50W x 2 @ 4OHM 1.0% THD+N Number of Channels: 2 Rated Power (RMS Continuous Power): 50 Watts x 2 @ 4-Ohm 75 Watts x 2 @ 2-Ohm 150 Watts x 1 @ 4-Ohm Bridged Total Power (Sum of Rated Power): 150 Watts RMS Dynamic Power (PVC/PowerCube ): 61 Watts x 2 @ 4-Ohms Res 94 Watts x 2 @ 2-Ohms Res Bridgeable: Yes Frequency Response: 20Hz to 20kHz +/-1dB Efficiency (average): 66% @ 4-Ohm Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0% 2-Ohm: <1.0% Crossover Controls: High-Pass/Low-Pass (HP/LP): 50-250Hz @ 12dB/octave Butterworth Tone Controls: Punch Bass: 0dB to +12dB @ 45Hz Input Sensitivity: 150 mV to 4 V Signal Input: Low Level: 1 RCA pair Signal Output: Low Level: 1 RCA pair Power Input Connector: Screw terminal Power Wire Gauge: 4 AWG Speaker Output Connector: Screw terminal Speaker Wire Gauge: 8 AWG Heat Sink Type: Extruded Aluminum Cooling: Convection Remote Controls: - Visual Indicators: Power/Protect LED Circuit Topology Class: Class-A/B Operating Voltage: 9 - 16 VDC Recommended Fuse (not included): 20 A Max. Current Draw (13.8V Sinewave): 20 A Average Current Draw (13.8V Music): 10 A Suggested Alternator: 75 A Shipping Weight: 6.6 Lbs. (2.99 Kg.) Dimensions (H x W x D): 1.98 x 6.77 x 11.22 (in) 5 x 17.2 x 28.5 (cm) Dimensional Diagram:

Products that customers have also bought:

Abtec - bringing the future to you...