AW Series HQ 3" Speakers
The AW3 mid-woofers represent "state of the art" in driver technology.
The machined motor structures with the distortion reducing effects of Faraday Rings are held to the tightest tolerances and provide a well damped magnetic field for the voice coil.
The motor features dual neodymium magnets for high magnetic energy from the smallest possible footprint. Upper and lower venting is used to maximize heat dissipation.
The suspension was optimized for sharp mid-range and extended upper frequency. The coil wire is the highest temperature available and held with the finest adhesives. The coil former is ventilated and the wire gauge/former thickness optimized to reduce moving mass. The adhesives from the coil to cone are bonded with specialized, hardened material to pass all energy from the coil to the cone.
The cone is made from lightweight aluminium to achieve wide bandwidth and efficient energy transfer to the air.
DDA components include all the dizzying aray of technology one finds in the upper echelon of the worlds finest drivers along with precision German assembly and attention to detail. The result is crisp, clear and detailed sound with forceful bottom end.
CMS .76 mm/N
Frequency Response 100 Hz - 22kHz
FS 103 Hz
Moving Mass 3.04g
Nominal Impedance 4 Ohm
Power Handling (RMS/Peak) 60/240
Suspension Travel .394" / 1 cm
VAS 1.31 L
Voice Coil Diameter .984" / 2.5 cm
Woofer Diameter 3" / 7.62 cm
A - Outside Diameter 3.25
B - Cutout Diameter 2.875
C - Mounting Depth 1.5
D - Motor Diameter 1.25
E - Motor Depth 0.375
F - Outside Height 0.125